• 0 items$0.00
  • Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Hands Occupied

Colorful knitting, crochet, latch hook and macrame from craft book author & designer Heidi Gustad.

  • BLOG
    • Knitting
    • Crochet
    • Latch Hook
    • Macramé
    • Punch Needle
  • ABOUT
  • Shop
  • Nav Social Menu

    • Instagram
    • Pinterest
    • RSS
    • TikTok
    • YouTube

How-to: Pleated Lampshade Redo

September 14, 2011 6 Comments

How-to: Pleated Lampshade Redo at Hands Occupied

Supplies

a conically-shaped lampshade
upholstery fabric
scissors
(optional) pinking shears
hot glue gun
sewing machine
straight pins
iron
tape measure

Directions

Carefully remove the cover from your old lampshade. This process will vary depending on the cover used, or if there’s a cover at all.

Cut your upholstery fabric. Measure around the bottom (wider end) of your lampshade using a tape measure. Measure the height of your lampshade from top to bottom. Your fabric should be the length of the circumference of the bottom of the lampshade plus an inch or so for seam allowance. The fabric’s width should be the height of the lampshade.

Begin pinning your fabric to the lampshade using one pin at the top and bottom. Pin fabric all the way around, pinning it every few inches on the bottom and every inch or so on the top, depending on how wide you want your pleats to be.

Using your fingers, flatten each wave in your fabric at the top (as shown) and pin it down. Lucky for me, my lampshade’s adhesive stayed every so slightly sticky despite removing the old cover. I still pinned each pleat, but they kind of stayed in place on their own. I think you could recreate this effect if you experimented with an adhesive spray before pinning on your fabric. Just a thought.

Using an iron on a low setting, iron directly on your lampshade to secure your pleats. At this point, I set aside my project for a few days, pins and all. When I set out to finish the lampshade, my pleats were set even more.

Next, remove the fabric from your lampshade, pinning your fabric to itself as you go. The fabric will look like a C or a half-moon when it lays flat.

Iron the fabric on a high setting. This will reduce the bulkiness of your lampshade once you’re ready to reattach the fabric cover.

Reattach your fabric to the lampshade using hot glue or a spray adhesive, being careful to keep it straight. I’d cut my fabric a little long, so I folded the end over and glued a little lip down to make the cover extra snug.

I used a little dab of hot glue at the top of each pleat as I removed the straight pins to lock them down.

I also gave the lampshade a once over with an iron on low to make sure everything stuck.

Cut two strips of your fabric, an inch-and-a-half wide. One strip should be the circumference of the top of your lampshade plus one inch, and the other should be the circumference of the bottom of your lampshade plus one inch.

Fold one half inch of your fabric and pin it to your ironing board, as shown. Iron it down. Then, fold in the other side, pin it to your ironing board, and iron that down as well. Sew the strip using a sewing machine. Repeat this process for the other strip of fabric.

Now, all you’ve got left to do is glue each strip to the top or bottom of your lampshade using hot glue. Tuck in and glue down the end to prevent fraying.

I love how this turned out. I was worried it was going to look too much like a cheerleading skirt, but I think it turned out all right!

Yes, my husband has a huge record collection (I buy craft supplies, he buys LPs. That’s the deal. ;)). And yes, the lamp pictured is a very old silver clarinet. It’s been in my family for years, and one of my grandparents made it for me. Stay tuned for more on the lamp in an upcoming edition of My Family’s Crafts. For now, check out how cool the lampshade looks with my no-sew valance at the top of this post.

Filed Under: How-to Tagged With: diy, hot glue, How-to, lampshade, pleats, Sewing

About Heidi

Heidi Gustad is a craft book author, designer & creator specializing in yarn crafts like knitting, crochet, latch hook & macramé. Her first book, Latch Hook: 12 Projects for the Modern Maker, is out now.

Previous Post: « How-to: Indoor Herb Garden
Next Post: Inspiration Thursday »

Reader Interactions

DID YOU LIKE THIS POST?
Visit similar articles...

  • How-to: Punk Rock Valentine’s ClutchHow-to: Punk Rock Valentine’s Clutch
  • How-to: Louise Hat from Bob’s BurgersHow-to: Louise Hat from Bob’s Burgers
  • Attention, DIY Brides & Handmade Hostesses!Attention, DIY Brides & Handmade Hostesses!
  • Knitting Needle Case DIYKnitting Needle Case DIY

DON’T MISS ANOTHER UPDATE

Comments

  1. Bianca Williams

    March 7, 2014 at 11:52 pm

    You did a really nice job. Thank you for the detailed pictures. :)

    Reply
  2. Carolyn

    April 13, 2014 at 6:50 pm

    I am trying to do the same thing to a lamp that I have. Unfortunately I am having a very difficult finding material to co-ordinate with the colors in my living room. I didn’t realize that the old plated cover was glued to another lamp shade underneath. I purchased some ribbon to go around the end of the old pleated shade but it requires more ribbon that I have on hand. Now if I could find some upholstery coordinating fabric I would be ready to complete the project….

    Reply
  3. Wendy

    November 6, 2015 at 5:01 am

    I just wanted to thank you for your tutorial on lampshades. I have searched and searched for a lampshade replacement and oh my goodness the prices. I have brought home two different shades only to return them. I came across your blog and thought Id give it a try. What did I have to lose?? Well I love it! Its in the pinned stages but I can’t wait to press it and glue it on in a few days!

    Reply
    • Heidi

      November 6, 2015 at 8:01 pm

      Wonderful! Glad you found this useful. :)

      Reply
  4. Sheri

    March 15, 2022 at 2:22 pm

    I really wanted to view this post, but the pictures quickly turned to ads before I was able to view them. This was very annoying.

    Reply
    • Heidi

      March 16, 2022 at 1:24 pm

      Oof, that’s a new ad type, and I agree it’s not ideal. I’ll email the robots at my ad network to get that kind of ad disabled. Thanks for the heads up. ✌️

      Reply

Leave a Reply to Heidi Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Heidi Gustad from Hands Occupied / Craft Book Author and Knitting, Crochet, Latch Hook and Macrame Designer

Hi! I’m Heidi (she/her/hers), a craft book author & pattern designer specializing in knitting, crochet, latch hook & macrame. Really anything with yarn! ❤️  My work combines vintage and modern design elements, featuring bold colors and graphic motifs.

EMAIL NEWSLETTER

Never miss a tutorial with these short & sweet monthly updates.

Find Me on Social Media

  • Instagram
  • Pinterest
  • TikTok
  • YouTube
Latch Hook by Heidi GustadDiscover Unique Items

Footer

INSTAGRAM

handsoccupied

Craft book author, designer & creator specializing in yarn crafts like knitting, crochet, latch hook & macramé
❤️ Email preferred

Heidi Gustad 🧶✂️
If only knitting a whole project took 39 seconds… 😮‍💨 
.
In this video, you can see how the Intarsia Flower Pillow pattern knits up - two flat panels, one with intarsia, both are blocked, and then they’re seamed. Find the pattern on @hi.ravelry & my website, just search Intarsia Flower Pillow. 🌸 
.
P.S. I’m really smiling in this video while seaming the pillow, so I guess I’m proving last week’s claim that I truly enjoy that sometimes-dreaded task. 😆🫣
In knitting, a Left Lifted Increase (LLI) lets you In knitting, a Left Lifted Increase (LLI) lets you add a stitch in between two columns of stitches that leans to the left. Similar to an M1L, LLIs allow you to increase nearly invisibly.
.
To learn more about lifted increases, including when to use them and how they differ from Make 1s, head to the 🔗 in my profle. 
.
Have you ever used lifted increases? I used M1’s almost exclusively for a long time when I needed to inc between stitches, but when I designed the Intarsia Flower Pillow pattern, I needed something that would allow me to increase a lot near my cast on, and M1’s resulted in edge curling. The more you know! 🌈 
.
Yarn: @lionbrandyarn Wool Ease from my Stash / Neddles: @boyeyarncrafts - Just remembered these are the needles I learned to knit on at age 8. 😂
.
#handsoccupied #knitting #learntoknit #howtoknit #sweaterknitting #knitinspiration #knittersofinstagram #liftedincreases
Last week I got to hang out with my family & helpe Last week I got to hang out with my family & helped babysit my red-headed niece and nephew. So here’s some plane knitting, and a couple pictures (shared with permission) of my babysitting adventures.
.
Lessons learned: 1️⃣ Trying to knit around 2 toddlers, 2 cats & 2 large dogs is pretty hard. 2️⃣ I learned during water color time that pink and black make “colorful black.” 🩷🖤 3️⃣ Toddlers do NOT care about your rainbow sorting of their toys. 4️⃣ Toddlers are very good at finding mischief in a very short amount of time, what a surprise. 😂
.
#handsoccupied #knitting #placesyoucanknit #knitters #knitinpublic #handmadelife #knitting_inspiration
Weaving in ends & seaming with mattress stitch are Weaving in ends & seaming with mattress stitch are both so useful for garment knitting! But for me, weaving in ends can feel like a chore while the latter feels like I’ve successfully done magic. 🧙🏻‍♀️ Does anybody else run into this phenomenon? Are you the opposite? Any theories as to why they feel different? 
.
In this video, I’m finishing my brand new Intarsia Flower Pillow. 🌸 I’m working with @universal_yarn Uni Merino & the pattern is available at the 🔗 in my b1o. 
.
#handsoccupied #intarsiaflowerpillow #intarsia #intarsiaknitting #knitting #colorwork #knitpillow #knittinginspiration #knittersofinstagram
I independently released a knitting pattern today, I independently released a knitting pattern today, my first in 5 years! The Intarsia Flower Pillow is a 16” (40cm) round pillow knit with an intentional combination of intarsia, stockinette, garter and seed stitch. This pillow has everything you need to level up your intarsia technique while also knitting something you can use. 
.
This pillow allows you to practice knitting intarsia while simultaneously increasing and decreasing. The Intarsia Flower Pillow pattern was designed to be a little knit-nerdy for learning and a little cute, arming you with many of the skills you'd need to knit an intarsia sweater. 
.
Intarsia Flower Pillow is available in the Hands Occupied Sh0p and on @hi.ravelry . You can read more about the pattern on the bl0g, the🔗 are where you’d think.
. 
YARN: @universal_yarn Uni Merino in Antiquity, Fjord and Conch / NEEDLES: US 2 (2.75 mm) / PATTERN: Intarsia Flower Pillow by Heidi Gustad
Load More... Follow on Instagram

Copyright © 2023 / Foodie Pro Theme On Genesis Framework / Branding by Ink + Mortar
All Site & Shop Policies / Privacy Policy / Cookie Policy