• 0 items$0.00
  • Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Hands Occupied

Contemporary yarn crafts by Heidi Gustad. Knitting, crochet, latch hook and macrame.

  • BLOG
    • Knitting
    • Crochet
    • Latch Hook
    • Macramé
  • ABOUT
  • Shop
  • Studio
  • Nav Social Menu

    • Facebook
    • Instagram
    • Pinterest
    • RSS
    • Twitter
    • YouTube

How-to: Back Seat Pet Protector

November 14, 2013 12 Comments

Kia Logo
How-to: Back Seat Pet Protector | Hands Occupied

Above is a rare glimpse of my handsome bigger dog Woodrow*, a chow mix whose fur sheds everywhere. It’s the kind of fur that seems to weave its way into everything, including car upholstery. The last thing I want to do in the middle of  a long road trip with two pooches is to take a break to vacuum the back seat of my beloved Kia Optima. If you ever travel with pets, or even messy kids, I recommend making your own back seat protector. Even with the most basic of sewing skills, which is totally the camp I fall in, you can sew this back seat protector in an afternoon. With this washable car accessory, you can make your dogs feel at home – even in the car.

How-to: Back Seat Pet Protector | Hands Occupied

*He’s scared of the noises my camera makes! Aww, right?

Supplies

4.25 yds nylon strapping material, 1 inch wide
1 inch wide slide release buckle
3 packages of 3 inch double fold bias tape/quilt binding
2 yds – polar fleece that’s at least 54 inches wide
2 yds – 54 inch upholstery fabric
sewing machine
thread
fabric scissors
tape measure
straight pins
iron

Directions

Measure the back seat of your car for dimensions listed below. If you’re driving a 2006 Kia Optima like me, you can use my dimensions.

How-to: Back Seat Pet Protector | Hands Occupied

Iron your upholstery fabric before beginning to remove any wrinkles. Cut your fabric so it meets your back seat’s dimensions. To make purchasing and cutting fabric easier, I stuck to two yards (72 inches) of fabric length. 54 inches is a standard width for fabric, so I decided to make my finished back seat cover 54 by 72 inches for simplicity’s sake. Remember when I said I’m no expert seamstress?

Pin your fabric together, wrong sides facing each other. Sew a basting stitch all the way around to keep the large pieces of fabric in place when you sew. Remove the pins. Pin bias tape all the way around the edges of your fabric and sew it in place with a sewing machine, removing your pins as you go.

How-to: Back Seat Pet Protector | Hands Occupied Iron all of the bias tape to smooth it out.

How-to: Back Seat Pet Protector | Hands Occupied

Cut your nylon strapping into the following lengths: 80 inches, 30 inches (2 pieces), 7 inches. Thread the 7 inch piece through the female end of the slide release buckle.

How-to: Back Seat Pet Protector | Hands Occupied

Sew a square with an X through it near the buckle, as shown.

How-to: Back Seat Pet Protector | Hands Occupied

Measure 25 inches (or the height of your back seat) from the shorter end of the rectangle of fabric, and mark it with a pin.

How-to: Back Seat Pet Protector | Hands Occupied

Hand sew the raw end of the nylon strapping to the rectangle where you marked it, folding under the raw edges.

How-to: Back Seat Pet Protector | Hands Occupied

Thread the 80 inch piece of nylon through the other end of the slide release buckle. Fold the end of the nylon nearest the buckle over twice and sew down. Fold over once the other end of the nylon and sew it to the fabric rectangle at the 25 inch mark using a box with an X through it.

How-to: Back Seat Pet Protector | Hands Occupied

Measure the location of your back seat’s head rests. Sew a 30 inch piece of nylon strapping to the rectangle in a horseshoe shape where it will be able to loop over the head rests to keep the back of the seat covered. You should sew each end of the horseshoe shape using the box with an X through it for maximum security.

That’s it! A DIY back seat protector to keep your ride clean and your pooches happy. Isn’t the bones and bandana fabric cute, by the way? :)

How-to: Back Seat Pet Protector | Hands Occupied

Storm, unlike Woodrow, does not fear the sound of a camera shutter. 

How-to: Back Seat Pet Protector | Hands Occupied

Nor, apparently, does she fear the open road. 

This post is sponsored by Kia.

Filed Under: Giveaways, Reviews & Sponsored, How-to, Pet Projects, Sewing Tagged With: back seat guard, back seat protector, blanket, car guard, craft, crafts, diy, dogs, kia, kia optima, pet diy, pet project, pets, Sewing

About Heidi

Heidi Gustad is a craft book author & content creator in love with primary colors & vintage vibes. She specializes in knitting, crochet, latch hook and macramé, and her first book, Latch Hook: 12 Projects for the Modern Maker, is out now!

Previous Post: « DIY FYI: Duct Tape Crafting Tip
Next Post: Weekly Reader »

Reader Interactions

DID YOU LIKE THIS POST?
Visit similar articles...

  • Rope Ball Surprise Dog ToyRope Ball Surprise Dog Toy
  • Dog Costume InspirationDog Costume Inspiration
  • Knitting Needle Case DIYKnitting Needle Case DIY
  • DIY Light-Up Cuff BraceletDIY Light-Up Cuff Bracelet

DON’T MISS ANOTHER UPDATE

Comments

  1. M

    November 16, 2013 at 9:30 am

    So I’m interested in trying to make this, but I can’t figure out what the 80 inch nylon strap at the 25 inch mark is there for. Do you fold down your seat and wrap the strap around the whole seat-back? I also don’t understand why the size of the project is the height of the backseat X 2 + the depth of the backseat. Are you talking about the distance from the floor to the backseat + the depth of the backseat + the height of the back of the backseat?

    Thanks!

    Reply
    • Heidi

      November 17, 2013 at 8:18 am

      Hi M!

      Yes, the strap straps behind the entire backseat if you’ve got one that flips down. I included it since mine does, but also in case I ever need to take my dogs in a friend’a car on a trip and need to step it to a SUV seat or something like that.

      I included the back seat height twice so that the cover would hang down to the floor for extra protection. You can really customize this basic pattern however you like! You can also include a second
      set if nylon “horseshoes” – as I called them – on the other end of the cover to make the cover rotatable. You can also use a second set of “horseshoes” to hook the far end onto the front seats’ headrests, creating a sort of hammock, like this: http://pinterest.com/pin/63472675971529111/

      Thanks for your great questions- let me know if the link doesn’t work for you.

      Heidi :)

      Reply
  2. Anne

    November 17, 2013 at 10:01 am

    Awesome!! I’ve linked to your tutorial over at Craft Gossip: http://sewing.craftgossip.com/tutorial-back-seat-cover-to-protect-your-car-from-pet-hair/2013/11/17/
    –Anne

    Reply
    • Heidi

      November 17, 2013 at 10:08 am

      Thanks, Anne! You’re the best :).

      Reply
  3. Linda G

    November 17, 2013 at 12:53 pm

    On way to car wash to vacuum car, Joanns for fabric and home to make this!!

    Reply
    • Heidi

      November 17, 2013 at 3:43 pm

      Awesome! When you make it, I’d love to see some pics! I’ve got a reader gallery I’m always looking to share people’s projects in :) -Heidi

      Reply
  4. Linda G

    November 17, 2013 at 8:45 pm

    Made it!! Pics later – but wanted to let you know my variation – I put elastic on the top instead of a buckle – slides over the headrests and a bit easier :)

    Reply
  5. Linda L

    June 14, 2014 at 9:05 pm

    This looks great! I will give this a try for our dog (a Dalmatian that really sheds). I think I will make mine with some slits for the seat belts. Our dog wears a harness with a seat belt attachment, so the slit will be necessary to access the receiving side of the buckle. Also, I am thinking of using fleece. Slits will be easy with that since fleece doesn’t ravel. Any thoughts or suggestions for me before I get started? :-)

    Reply
    • Heidi

      June 15, 2014 at 7:45 pm

      That sounds great- just remember to get enough bias tape to cover those openings! I’d love to see it when you’re done :)

      Reply
  6. Teresa

    February 3, 2015 at 1:57 pm

    Hi! I’m just wondering if you know anyone willing to sell these? I would love one and do not have the time to make one.
    Thanks so much,
    Teresa

    Reply
    • Heidi

      February 3, 2015 at 4:58 pm

      I’ve seen similar items on Etsy and Amazon – just search for them and a few options come up. Best of luck!

      Reply

Trackbacks

  1. Tutorial: Back seat cover to protect your car from pet hair | Sewing | CraftGossip.com says:
    November 17, 2013 at 9:58 am

    […] When it gets covered with hair, you can take it out of the car and send through the wash.  Go to Hands Occupied to see how to make […]

    Reply

Leave a Reply to Tutorial: Back seat cover to protect your car from pet hair | Sewing | CraftGossip.com Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Heidi Gustad from Hands Occupied / Craft Book Author and Knitting, Crochet, Latch Hook and Macrame Designer

Hi! I’m Heidi, an author, yarn craft designer and content creator specializing in knitting, crochet, latch hook & macrame. My work unapologetically features primary colors and vintage-meets-modern style. My first book, Latch Hook: 12 Projects for the Modern Maker, is now available!

Professionally I’m most known for: advanced intarsia knitting design & modern latch hook design.

work with heidi

UPDATES BY EMAIL

Get a free pattern + biweekly updates sent to your inbox.

Let’s be friends!

  • Facebook
  • Instagram
  • Pinterest
  • Twitter
  • YouTube
Latch Hook by Heidi Gustad

Footer

INSTAGRAM

handsoccupied

Craft book author & content creator in love with primary colors & vintage vibes. / #latchhookbook out now!
.
knitting, crochet, latch hook & macramé

Heidi Gustad 🧶✂️
Happy Wrestlemania weekend, folks!!! 🎊 It’s c Happy Wrestlemania weekend, folks!!! 🎊 It’s coincidentally International Punch Needle Rug Hooking Day today, so I’d be remiss not to share a first look at this project finished JUST in time to wear while I watch some rasslin’ on a pirate ship in a football stadium in Tampa! 💪🏻 I’m excited to watch tonight’s women’s matches the most. Eee!
.
.
Pictured: A blond woman in a denim dress and glasses wearing a giant belt made with punch needle. The belt is made with wool in primary colors and was inspired by the WWE Universal Championship title belt. 
.
This is just a preview - after jab 2.0 tomorrow (feeling grateful 🙏🏼), I’ll be editing together a vlog about the design process for this wooly waist cover. Sometimes it’s hard to know how to make some of your wilder craft ideas come to life. Stuff you’ll never find a pattern for, you know? I’ll finish editing that ASAP, but I might take a few days to edit if I feel like trash from 💉 and only want to watch wrestling and wrestling YouTube for a day or two. 😂
.
.
#ipnrhd #punchneedle #wwe #wrestling #championshipbelt #wool #yarn #handmade #universalchampionship #universalchampion #rugmaking #wrestlingfan #wrestlemania37 #wrestlemania
A look at the halo on the back of my wrestling-ins A look at the halo on the back of my wrestling-inspired punch needle project! It’s interesting to see how fuzzy the handspun beige yarn is compared with the primary color sections of @knit_picks Wool of the Andes Bulky. ❤️💛💙🤎 
.
Pictured: The back of an in-progress punch needle project. A wooden punch needle tool sits on the work.
.
#punchneedle #woolrug #rugmaking  #kpambassadorsapr21 #sponsored #griefproject #handsoccupied #wrestlingfan #universalchampion #yarn #yarncraft #wool #needlepunch
Happy Easter / One week til Wrestlemania! Finishin Happy Easter / One week til Wrestlemania! Finishing up the punch needling part of this crazy @wwe inspired project by tonight. 💪🏻🧶 Anybody else have crafty plans for this fine spring day? 
.
Pictured: A blond woman sits, smiling and holding an in-progress punch needle project inspired by the Universal Championship belt. Houseplants are in the background and there’s lots of sun. 
.
#punchneedle #griefproject #handsoccupied #heidigustad #wrestlingcrafts #wwe #universalchampion #universalchampionship #wool #wooloftheandes #primarycolors #oxfordpunchneedle
I'm finally starting to get some of my energy back I'm finally starting to get some of my energy back from the past few weeks, and as I dip my toe back into production mode, the long-promised seamed sweater knitting YouTube series is at the top of my list. I've got FOUR versions of a simple sweater I've been playing with since last JULY to feature as a free pattern for folks who want to knit along during the series. Pictured is the first prototype for the series, knit in 2 colors of @knit_picks Mighty Stitch yarn. I imagine this soon-to-be short sleeved number will come in handy as an emergency Waldo costume or Christmas sweater. 🌲 
.
I've got my own list of topics I think folks would like to see in a series like this: things like tips for construction, working with vintage patterns, how to seam as invisibly as possible, and more, but as always, I'd love to hear from you: What scares you about knitting seamed sweaters? What would be helpful to cover, especially since we'll be doing more long form video content. I get so much positive feedback on my series of 20 minute+ intarsia tutorials, so I'm using those as a starting point as I produce this series. Seamed sweaters using vintage or self-improvised patterns are one of my favorite things on the planet, so I'm eager to share some seamed sweater skills with y'all super sweet folks. 😉 
.
.
Pictured: A red and white striped, short sleeved sweater knit in pieces that have yet to be seamed. They are laid out on a yellow and orange colorblock background and one sleeve is yet to be bound off. 
.
#handsoccupied #seamedsweater #kpambassadorsmar21 #sponsored #knitpicks #waldo #waldosweater #wip #yarncraft #yarn #knitting #knittersofinstagram #heidigustad #vintageknitting #sweaterknitting
Work continues this evening on my absurd punch nee Work continues this evening on my absurd punch needle pro wrestling inspired championship belt project. I’ve finished most of the front pretty quickly thanks to the @knit_picks Wool of the Andes Bulky yarn I’m using. For now, I’ve got a couple more weeks until Wrestlemania, & I’m on track to finish this in time! 
.
The biggest question I have is what to do with the “plates” - the open circles in the picture. Should I try to closely replicate the Universal Championship belt or go rogue and make it wool themed? Please advise in the comments. ☺️🧶🙏🏻🐑 
.
Pictured: The front of an in-progress punch needle project. A wooden punch needle tool with navy yarn running through it rests on top of the work. 
.
#kpambassadorsmar21 #sponsored #knitpicks #punchneedle #rugmaking #primarycolors #punchneedlerughooking #punchneedlelove #wool #wip #yarncraft #yarn #yarnaddict
Load More... Follow on Instagram

Copyright © 2021 / Foodie Pro Theme On Genesis Framework / Branding by Ink + Mortar
All Site & Shop Policies / Privacy Policy / Cookie Policy